I am using computer in which in which I have recently installed windows vista operating system. Now when I have installed Nuendo 3.2.0 in my computer at that time it installed successfully and after that when I try to start the software at that time it shows me CLED Error in my computer. Is that anything wrong with my software? I was not facing this issue when I was using windows XP in my computer. Please give me some solution to fix this problem.
Well I have read your problem and I would like to tell you that you should first try to solve this problem by removing the Nuendo 3.2.0 software from your computer completely and after that installing it again. Before you install this software again ion your computer you have to delete all the temporary files from your computer. After deleting all the temporary files from your computer installs that Nuendo 3.2.0 software again in your computer and after that you will be able to open that software.
If you want to solve this problem then I think you have to remove the cledx.exe file from your computer startup list and after that you have to restart the computer and when computer will start again at that time you will not face this problem again with your computer. I was also facing the same problem with my computer and after that I have tried same solution and then problem has gone. If you want any more information regarding this then let me know.
After referring your above solution I have tried to solve this problem by removing Nuendo 3.2.0 software from my computer and after that I have run Ccleaner in my computer and then I have restart the computer. Now after that I have installed Nuendo 3.2.0 software in my computer again but after doing that also I am still facing the same problem. Now after that I have tried to remove the cledx.exe file from my start up list but I don’t know how to do that please help me out with this.
Thursday, 1 September 2011
How can I have custom calendar view on the Microsoft
As the title suggesting what I wanted to ask over here in this particular thread. I have installed Microsoft Outlook 2007 on the computer of mine. Yes it is well known that the it is having view for Day, week and month. Let me know how can create custom view on the calendar of the Outlook? Let me know if you are having any specific solution to get the requirement of mine. Thanks a lot in advance.
Looking at the requirement of yours I am suggesting following steps which you can use to meet the requirement of yours.
You have to click on the Calendar icon on the Outlook window.
Now you have to go for the View menu and then you have to go for Current View and the type of the View.
Now select the Customize Current View command form the Current View SubMenu to make changes.
You should modify the number of days which has been displayed per week and other option on the Tool menu.
Also you can have more stuff into the Calendar Option section.
Well you can change the default time interval by using following steps.
you have to right click on the Calendar View and select the Other Settings.
Now you have to click on the Time Scale drop down list and you have to select the other time period according to requirement of yours.
Finally click on the Ok button.
Using following steps you can have the truncated items into the Month view of the Outlook Calendar.
You should right click on the Calendar view and simply select the setting from the right click context menu.
Now select the Month section from the font button. Into resulting window you have to select smaller font.
I am posting following steps which you can apply to get the side by side view on the calendar of Outlook. It is very simple to achieve and it consist of the following steps.
You need to hold the control key from the key board of yours and you have to click on the Date Navigator which is available on the Navigation Pane.
Even you will be able to add more days to the view and continue with the ho
Looking at the requirement of yours I am suggesting following steps which you can use to meet the requirement of yours.
You have to click on the Calendar icon on the Outlook window.
Now you have to go for the View menu and then you have to go for Current View and the type of the View.
Now select the Customize Current View command form the Current View SubMenu to make changes.
You should modify the number of days which has been displayed per week and other option on the Tool menu.
Also you can have more stuff into the Calendar Option section.
Well you can change the default time interval by using following steps.
you have to right click on the Calendar View and select the Other Settings.
Now you have to click on the Time Scale drop down list and you have to select the other time period according to requirement of yours.
Finally click on the Ok button.
Using following steps you can have the truncated items into the Month view of the Outlook Calendar.
You should right click on the Calendar view and simply select the setting from the right click context menu.
Now select the Month section from the font button. Into resulting window you have to select smaller font.
I am posting following steps which you can apply to get the side by side view on the calendar of Outlook. It is very simple to achieve and it consist of the following steps.
You need to hold the control key from the key board of yours and you have to click on the Date Navigator which is available on the Navigation Pane.
Even you will be able to add more days to the view and continue with the ho
Which video format /recorder to use for divx
have recently purchased an iPod nano and I am very happy for purchasing this iPod. But some of the video formats are not supportable by the iPod nano. And I am using the Cucusoft iPod video converter to recode my Divx and the WMV movies to 320X240 and by using the H.264 codec. And these videos are not playable in my iPod nano. Is there any converter that can play the converted video in the iPod nano? Please help
I think that you will get it in the description have you ever noticed the description that is located in the market place of the video player and I think they will tell you the format. I think that this will also be very specific and I think that someone or the other will release the Divx codec for the phone. I am also having the Divx video but I also want to watch on my iPod. I think that you can do it by downloading the "video player".
In this case you can also use the video player I know that the video player in the market is very buggy or little buggy. But I think that this will help you out. And I was also having the problem so I also converted the video by using the video player. I converted about 6 videos but only 4 of them work properly and from that the 2 of them was corrupted and after restarting the iPod both of them another one also began to work. These videos work on my iPod and not on my phone. I am talking about the iPod and not about the phone.
I think that you should use the Xilisoft video converter 3.1.52 to convert the videos. And the steps I took to convert are firstly I crap the mpeg-4 profile picked video and then I customize the bit rate from 1200 to 512 an dafter that I also customized the audio settings from the bit rate of 80 to 96 and then I saved it in the iPod nano I used the default media player to play the video and after that the video was playing and ready to launch.
I think that you will get it in the description have you ever noticed the description that is located in the market place of the video player and I think they will tell you the format. I think that this will also be very specific and I think that someone or the other will release the Divx codec for the phone. I am also having the Divx video but I also want to watch on my iPod. I think that you can do it by downloading the "video player".
In this case you can also use the video player I know that the video player in the market is very buggy or little buggy. But I think that this will help you out. And I was also having the problem so I also converted the video by using the video player. I converted about 6 videos but only 4 of them work properly and from that the 2 of them was corrupted and after restarting the iPod both of them another one also began to work. These videos work on my iPod and not on my phone. I am talking about the iPod and not about the phone.
I think that you should use the Xilisoft video converter 3.1.52 to convert the videos. And the steps I took to convert are firstly I crap the mpeg-4 profile picked video and then I customize the bit rate from 1200 to 512 an dafter that I also customized the audio settings from the bit rate of 80 to 96 and then I saved it in the iPod nano I used the default media player to play the video and after that the video was playing and ready to launch.
Can't run VirtualBox on ext4 partition in mint linux
Hi, I have bought a brand new machine and in that I have installed Linux mint on it with the eXt4 partition, and it is working fine but when yesterday I was trying to install the virtual box on that I was actually unable to do that and was having too many errors. so after that I have search it on internet about this, but didn’t got any solution to this, and I am sure the operating system I am using is good, I mean to say there is no bug for sure, all the drivers are also installed properly.
For more useful tips & hints, please browse for more information at our website:-
Motorola Flipout
Steam Client
As you have described in the problem, it seem that the operating system us working perfectly in the machine but the problem is In the virtual machine itself, so I would suggest you that you should try another version to install it in your machine, because it might be possible that the version that you are using might have some problem in it, so downloading the new one will surely fix this problem, as you’ll get the whole new software rather than repaired files.
Generally I haven’t seen any such problem in the operating system but still as you’re getting this, so it might be possible that the software that you are using might not have support to run with the file system that you are using, so if you are willing to change it I would suggest you to try that also, I mean you should try to install other file system as EXT3, the software might run on that, and off course you’ll not get any such problem after doing this, but yeah before doing these you must have to make backup of all the important data that you have.
This is very known kernel bug, The host I/O cache should be disable though only for single controller at least and the medium ‘/home/MyUserName/.VirtualBox/HardDisks/Ubuntu_LAMP.vdi’ for this VM is situated on an ext4 division. And you have to do this as soon as possible because it can cause damage in virtual disk image beneath these circumstances. Either you can have another option too like you can allow the host I/O cache enduringly in the VM setting, or put the disk reflection and the snapshot directory onto a dissimilar file system, as mentioned by the above user.
For more useful tips & hints, please browse for more information at our website:-
Motorola Flipout
Steam Client
As you have described in the problem, it seem that the operating system us working perfectly in the machine but the problem is In the virtual machine itself, so I would suggest you that you should try another version to install it in your machine, because it might be possible that the version that you are using might have some problem in it, so downloading the new one will surely fix this problem, as you’ll get the whole new software rather than repaired files.
Generally I haven’t seen any such problem in the operating system but still as you’re getting this, so it might be possible that the software that you are using might not have support to run with the file system that you are using, so if you are willing to change it I would suggest you to try that also, I mean you should try to install other file system as EXT3, the software might run on that, and off course you’ll not get any such problem after doing this, but yeah before doing these you must have to make backup of all the important data that you have.
This is very known kernel bug, The host I/O cache should be disable though only for single controller at least and the medium ‘/home/MyUserName/.VirtualBox/HardDisks/Ubuntu_LAMP.vdi’ for this VM is situated on an ext4 division. And you have to do this as soon as possible because it can cause damage in virtual disk image beneath these circumstances. Either you can have another option too like you can allow the host I/O cache enduringly in the VM setting, or put the disk reflection and the snapshot directory onto a dissimilar file system, as mentioned by the above user.
Unable to do Subtotal in Microsoft Excel
Well I am having an issue with the Microsoft Excel which I have installed on the computer of mine. I have noticed that I am unable to do subtotal on Excel sheet. I have tried with the lots of stuff but there was no solution to fix the matter of mine. Any help to fix the matter would be highly appreciated. Thanks a lot in advance.
If you are using Microsoft Excel 2003 on the computer of yours then I think I am aware of the solution and I would like to share with all of you. I think you are using list box and it would have the blue outline. If you wanted to convert the same then you have to use the choose the desire range on the Excel sheet and simply press the Alt, D, I and V from the keyboard of the computer of yours. so you should try the instruction which I have mentioned over here I am hoping that it would be useful to you.
Looking at the matter I am suggesting following steps which you can use to fix the matter of yours.
First of all you have to sort the list where you wanted to insert the sub total.
Now you have to add the subtotal button on the data tab.
Now choose the field for which you wanted to calculate the sub total.
You have to specify the type of total which you wanted to insert the function from the drop down list
You have to select the check boxes from the field and if you wanted to add the subtotal into the list box.
Now click on the Ok button.
If you are using Microsoft Excel 2003 on the computer of yours then I think I am aware of the solution and I would like to share with all of you. I think you are using list box and it would have the blue outline. If you wanted to convert the same then you have to use the choose the desire range on the Excel sheet and simply press the Alt, D, I and V from the keyboard of the computer of yours. so you should try the instruction which I have mentioned over here I am hoping that it would be useful to you.
Looking at the matter I am suggesting following steps which you can use to fix the matter of yours.
First of all you have to sort the list where you wanted to insert the sub total.
Now you have to add the subtotal button on the data tab.
Now choose the field for which you wanted to calculate the sub total.
You have to specify the type of total which you wanted to insert the function from the drop down list
You have to select the check boxes from the field and if you wanted to add the subtotal into the list box.
Now click on the Ok button.
Can run AutoCAD with administrator account
Well as the title stating what I wanted to ask over here in this particular thread. I have installed AutoCAD on the computer of mine. I have noticed that I am able to use this particular software when I am login as administrator on the computer. However it did not seems to be running when I am login with any user account. Let me know why I am getting the above mentioned issue. Any help on this particular matter would be highly appreciated. Thanks a lot in advance.
Looking at the situation I wanted to know answers of the below mentioned questions which would be useful to figure out the root cause of the problem. Can you tell me which operating system do you have installed on the computer? Can you tell me which version of AutoCAD do you have installed on the computer? Do you have done any changes on the computer of yours? which antivirus program do you have installed on the computer?
In order to fix the problem of yours I am suggesting following steps which you can try to fix the matter of yours. I recommend that you should simply locate the exe file of this particular program. You should right click on the same and you have to click on the Run as Administrator. Once you have done you should double click on the exe file of this particular program and see whether it is working or not. So try the same I am hoping that it would be useful to fix the matter of yours.
Looking at the situation I wanted to know answers of the below mentioned questions which would be useful to figure out the root cause of the problem. Can you tell me which operating system do you have installed on the computer? Can you tell me which version of AutoCAD do you have installed on the computer? Do you have done any changes on the computer of yours? which antivirus program do you have installed on the computer?
In order to fix the problem of yours I am suggesting following steps which you can try to fix the matter of yours. I recommend that you should simply locate the exe file of this particular program. You should right click on the same and you have to click on the Run as Administrator. Once you have done you should double click on the exe file of this particular program and see whether it is working or not. So try the same I am hoping that it would be useful to fix the matter of yours.
In which manner Gnome 3 is beating Ubuntu Unity?
am a Linux user from past couple of days. Recently I have installed Ubuntu 11.04 on the computer of mine. well I wanted to know what would be the output in case I am using Gnome 3 with the Ubuntu Unity? So let me know the speculation of yours on this particular matter. Thanks a lot in advance.
Well after releasing of the ubuntu 11.04 we would have the defult desktop as a Unity. i think Gnome 3 shell have been out from the scene. As far as I know most of the Gnome based distributions are having the classic Gnome and they are working fine with all the version of ubuntu. However I have noticed that the Ubuntu 11.04 and Gnome 3 are having performance issue with each other. But still you are wanted
I have already installed Gnome 3 on the computer of mine and even I have went to the early stages and loved the look and feel of Gnome 3. I have also noticed that the Unity is also having great look and feel. However I have noticed lots of issue with the Unity itself. Gnome 3 is having an ablity to migrate towards the libraries. This particular advantage should be taken by while using Unity. you can have the launcher and the pager when you are moving your mouse on the upper side left corner screen of the desktop of yours.
It is well known that the Gnome 3 us lacking the configuration. However it is having the sleek and efficient look and feel. You will have the same thing if you have installed Unity on the computer of yours. by that time I let you know you will not suffer from the random crashes and frustrating behavior menu of Gnome 3. Also you can have lots features on the Gnome 3 which would make superior Gnome 3 over the Unity.
Well after releasing of the ubuntu 11.04 we would have the defult desktop as a Unity. i think Gnome 3 shell have been out from the scene. As far as I know most of the Gnome based distributions are having the classic Gnome and they are working fine with all the version of ubuntu. However I have noticed that the Ubuntu 11.04 and Gnome 3 are having performance issue with each other. But still you are wanted
I have already installed Gnome 3 on the computer of mine and even I have went to the early stages and loved the look and feel of Gnome 3. I have also noticed that the Unity is also having great look and feel. However I have noticed lots of issue with the Unity itself. Gnome 3 is having an ablity to migrate towards the libraries. This particular advantage should be taken by while using Unity. you can have the launcher and the pager when you are moving your mouse on the upper side left corner screen of the desktop of yours.
It is well known that the Gnome 3 us lacking the configuration. However it is having the sleek and efficient look and feel. You will have the same thing if you have installed Unity on the computer of yours. by that time I let you know you will not suffer from the random crashes and frustrating behavior menu of Gnome 3. Also you can have lots features on the Gnome 3 which would make superior Gnome 3 over the Unity.
HP Product Assistant.msi is missing
I have HPG60 notebook in which I have windows vista in my laptop. my laptop was working fine. From last few days I am facing one problem with my laptop. Now in my laptop I get one message comes which says "An installation package for the product HPProductAssitant cannot be found. Try the installation again using a valid copy of the installation package "HPProductAssistant.msi" I have tried to fix this but I am not getting any solution. Please suggest me some solution.
I think you should try to solve this problem by doing system restore point in your laptop. if you have made any system restore point previously then you have to do system restore in your laptop and after that your problem might get solved. Just try this solution and after that check whether same problem is coming or not. I think after trying this solution your problem will get solved.
The problem which you are facing in your laptop is because of the missing hpproductassistant.msi file and if you want to solve this problem then you have to copy this file in your laptop and after that you will not get the same problem in your laptop. you can copy this file with the help of the CD which comes with the laptop. Just insert that CD and after that restore hpproductassistant.msi file in your laptop. if you want any more information then let me know.
I think you should try to solve this problem by doing system restore point in your laptop. if you have made any system restore point previously then you have to do system restore in your laptop and after that your problem might get solved. Just try this solution and after that check whether same problem is coming or not. I think after trying this solution your problem will get solved.
The problem which you are facing in your laptop is because of the missing hpproductassistant.msi file and if you want to solve this problem then you have to copy this file in your laptop and after that you will not get the same problem in your laptop. you can copy this file with the help of the CD which comes with the laptop. Just insert that CD and after that restore hpproductassistant.msi file in your laptop. if you want any more information then let me know.
PaperPort VIEWER for viewing PaperPort files
I am having Windows 7 64bits, and I am having many of the PaperPort files in my system as they are very much cost effective to organize, find and scan all your paper documents. I searched on the Google for the PaperPort files and found the result that seems to be saying that there is a “Viewer” for DL. But I don’t think so that there are any such viewers available. So can anyone help me to find out the
Yes, you can find many of the PaperPort Viewer and doesn’t matter that you are having any of the Operating system. As there are many of the PaperPort Viewer available for different operating System. Just go on to the official site of the nuance for viewing PaperPort. I think that you can you solution from there. You can go to the download options over there and select your product and platform that you require and then download it.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
Which is the extension of the file that you are using currently? Is it the .MAX files or something else? And also check whether you can open it from the acrobat reader or not. If you can try converting it form .max files to the pdf files then check whether you can do it or not. You can download the MAX image converter to convert all your .max files to the other supported files that you wish. So if you cannot get any of the PaperPort Viewer, then try doing this method.
Yes, you can find many of the PaperPort Viewer and doesn’t matter that you are having any of the Operating system. As there are many of the PaperPort Viewer available for different operating System. Just go on to the official site of the nuance for viewing PaperPort. I think that you can you solution from there. You can go to the download options over there and select your product and platform that you require and then download it.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
Which is the extension of the file that you are using currently? Is it the .MAX files or something else? And also check whether you can open it from the acrobat reader or not. If you can try converting it form .max files to the pdf files then check whether you can do it or not. You can download the MAX image converter to convert all your .max files to the other supported files that you wish. So if you cannot get any of the PaperPort Viewer, then try doing this method.
Looking for a good Help desk software
I am searching for new help desk software and require some suggestions. We are using our current Help desk software which is Numara Track-It and now we are looking for the renewal for this so we thought of getting some other alternative software. We were getting constant issues with the Track-It and we dint find it working 100% for over the year in spite of number of updates and the rebuilds. We require software that is similar to it but not so lackey. It should have the following:
- Work Order creation and tracking
- Inventory/Asset Tracking
- Reporting Capabilities
- Purchasing module for creating POS
- Around the same price range as Track-It
I would be really very thankful for all your responses.
We were in a test of using the Web Help Desk Software, and are thinking to run it in our company. The price of the software is also half of the price as of Track-It. till now we didn’t find any such features that are missing. We had got our 7-8 technicians for opting us for this software. The Help Desk software has the following features:
Asset Life Cycle Management
Reporting included
Knowledge-base Management
100% Web-based Help Desk Software Solution
Customer Satisfaction Survey Management
And many more features.
As of now, we have not faced any problems using this. But, has anyone used this software so that they can suggest that we are using the software that is going to be comfort?
- Work Order creation and tracking
- Inventory/Asset Tracking
- Reporting Capabilities
- Purchasing module for creating POS
- Around the same price range as Track-It
I would be really very thankful for all your responses.
We were in a test of using the Web Help Desk Software, and are thinking to run it in our company. The price of the software is also half of the price as of Track-It. till now we didn’t find any such features that are missing. We had got our 7-8 technicians for opting us for this software. The Help Desk software has the following features:
Asset Life Cycle Management
Reporting included
Knowledge-base Management
100% Web-based Help Desk Software Solution
Customer Satisfaction Survey Management
And many more features.
As of now, we have not faced any problems using this. But, has anyone used this software so that they can suggest that we are using the software that is going to be comfort?
Cannot work with iPod Touch 2G on Linux Mint 10
I am currently having the Linux Mint 10 Gnome with 32-bits and also got an iPod Touch 2nd gen which is 32GB. When I was having my Linux Mint 8 and 9 I was able to see the music in it. When I connect my iPod to the Linux Mint 10, then I get the following message.
Quote:
"You have just inserted digital audio player. Choose what applications to launch"
"You have just inserted a medium with digital photos. Choose what applications to launch"
I was using the Rhythmbox to open the music present in my iPod Touch. I can find the iPod under the “Devices” in the Rhythmbox. But when I click on it, it says that there is no music in my iPod. But I can play and browse music directly from the iPod. Is there any other way to solve this issue?
I think you can try using the gtkpod. I personally use this with my iPod nano which is of 5th gen. I am using this from many months and did not find any problem with it. But after getting this you need to create directory for your iPod in the program folder of the iPod. I think this would work if you create a proper link to your iPod. So I think you first get the gtkpod and then create a root for it in the Linux.
I think that if you want to connect the iPod or your iPhone in the Linux then you can try using the iFuse. You can directly connect your iPod touch with the Linux system with the help of USB cable. It is just simple to use this similar to using the USB disk drive. You don’t require any “jailbreaking” for the iFuse to use. Also you don’t require any other software to get it installed for using this iFuse.
Quote:
"You have just inserted digital audio player. Choose what applications to launch"
"You have just inserted a medium with digital photos. Choose what applications to launch"
I was using the Rhythmbox to open the music present in my iPod Touch. I can find the iPod under the “Devices” in the Rhythmbox. But when I click on it, it says that there is no music in my iPod. But I can play and browse music directly from the iPod. Is there any other way to solve this issue?
I think you can try using the gtkpod. I personally use this with my iPod nano which is of 5th gen. I am using this from many months and did not find any problem with it. But after getting this you need to create directory for your iPod in the program folder of the iPod. I think this would work if you create a proper link to your iPod. So I think you first get the gtkpod and then create a root for it in the Linux.
I think that if you want to connect the iPod or your iPhone in the Linux then you can try using the iFuse. You can directly connect your iPod touch with the Linux system with the help of USB cable. It is just simple to use this similar to using the USB disk drive. You don’t require any “jailbreaking” for the iFuse to use. Also you don’t require any other software to get it installed for using this iFuse.
How to change the command line resolution in Debian
I am having the command line resolution of 1280x1024 in my home server (Squeeze). But my graphics card can only go up to 1024x768. I was succeeded in changing the resolution for my GRUB2 but this didn’t help me out. I also tried to install the X and also the GNOME just to verify that they work at 1024x768. Currently my system
In the kernel line of the /boot/grub/menu.lst file, you need to add the parameters. You can see the VGA table for the reference. In the Linux Video Mode you can check this table out. But the resolution that my system supports is only of the 1280x1024. So I changed the resolution by adding the value of the vga= 793 in the last of the kernel line. So just need to add the value that you want in the vga, by referencing the table.
To configure the command line resolution, you need to configure your xorg.cofig file. To do so you need to type:
ps - chris the file /etc/X11/xorg.conf
When you open this file you will find the following line in it:
Depth 1
Modes "1280x960" "1024x768"
Once when you open and see this file, you can find out these lines and understand that where you need to enter the values.
There is a simple way to change the resolution of your command line, you just need to enter the values of the vga that you want according to the resolution. I.e. vga=”value value” from the parameter in the command line that is there in your grub.config file. You can also do this by editing during the boot time. You can find various resolution values for it, you can check the resolution table manually.
If you can try this using the text mode then you can do the following steps that will help you out to change the resolution of your command line. For that you need to edit your /boot/grub/menu.lst. You can edit this file using any of the text editors you are having. I use the vim for editing
Code:
In the kernel line of the /boot/grub/menu.lst file, you need to add the parameters. You can see the VGA table for the reference. In the Linux Video Mode you can check this table out. But the resolution that my system supports is only of the 1280x1024. So I changed the resolution by adding the value of the vga= 793 in the last of the kernel line. So just need to add the value that you want in the vga, by referencing the table.
To configure the command line resolution, you need to configure your xorg.cofig file. To do so you need to type:
ps - chris the file /etc/X11/xorg.conf
When you open this file you will find the following line in it:
Depth 1
Modes "1280x960" "1024x768"
Once when you open and see this file, you can find out these lines and understand that where you need to enter the values.
There is a simple way to change the resolution of your command line, you just need to enter the values of the vga that you want according to the resolution. I.e. vga=”value value” from the parameter in the command line that is there in your grub.config file. You can also do this by editing during the boot time. You can find various resolution values for it, you can check the resolution table manually.
If you can try this using the text mode then you can do the following steps that will help you out to change the resolution of your command line. For that you need to edit your /boot/grub/menu.lst. You can edit this file using any of the text editors you are having. I use the vim for editing
Code:
Dell PC suite - Phone Connection Wizard not working
am using Dell streak mobile and it is very nice mobile. In m mobile am using android Android 2.1 and now I want to upgrade my mobile with Android 2.2. Before I upgrade my mobile to android 2.2 I have to take backup of all the data and that is why I have installed Dell PC suite in my computer and after doing that it is not showing me Connection wizard and because of that I am not able to connect my mobile and unable to take backup of my data. Please give me some solution.
I think something went wrong while installing the Dell pc suite in your computer and that is why you are facing this issue. According to me you should first remove the Dell pc Suite from your mobile and after that restart your computer. now after doing that you have to install the Dell pc suite again in your computer and after that check whether Phone Connection Wizard is working or not. I think after trying this method your problem will get solved.
If you are still getting the same problem after trying above solution if Phone Connection Wizard is still not working then I think you have to first download the Dell PC suite from internet. While downloading the Dell PC suite check whether any updated version of Dell PC suite is available or not, if you get any updated version then download it and after that install it in your computer. Now after doing that Phone Connection Wizard will start working and you will be able top take
Well my connection wizard is working properly now. After reading your above post I have downloaded Dell PC suite from internet and after that I have installed in my computer. Now after doing that Phone Connection Wizard is working fine now but after that when I tried to connect my Dell streak with my computer at that time my computer doesn’t recognize my dell streak. Please tell me what I should do to get rid of this problem.
I think something went wrong while installing the Dell pc suite in your computer and that is why you are facing this issue. According to me you should first remove the Dell pc Suite from your mobile and after that restart your computer. now after doing that you have to install the Dell pc suite again in your computer and after that check whether Phone Connection Wizard is working or not. I think after trying this method your problem will get solved.
If you are still getting the same problem after trying above solution if Phone Connection Wizard is still not working then I think you have to first download the Dell PC suite from internet. While downloading the Dell PC suite check whether any updated version of Dell PC suite is available or not, if you get any updated version then download it and after that install it in your computer. Now after doing that Phone Connection Wizard will start working and you will be able top take
Well my connection wizard is working properly now. After reading your above post I have downloaded Dell PC suite from internet and after that I have installed in my computer. Now after doing that Phone Connection Wizard is working fine now but after that when I tried to connect my Dell streak with my computer at that time my computer doesn’t recognize my dell streak. Please tell me what I should do to get rid of this problem.
Not able to have outlook preview on Excel 2007.
Hi I have been working on Microsoft Excel 2007 from past many years but from past few days I am having certain problem with it, as whenever I try to preview any Microsoft Excel attachment file it launches a new Excel window, and after that places the spreadsheet back into the email preview area, and leaves the Excel window blank. I am not able to figure it out what is the exact problem with it! Please help.
I even I am having the similar problem, as whenever I receive any of Excel attachments file and I try to open the attachment file from Outlook itself the main Excel application also gets open automatically to view the file without giving any command to open it, and when I close the original file the main Excel application doesn’t get closed! Does anyone have any idea to how to stop this
I would like to ask some questions to you so that I can help you in a better way. Can you please tell me that the problem which you are facing is it with all attachments? Or its just with the Excel attachment file? And what all options are you able to see on the screen when you right-click on the attachment to view it? Please get back to me with the answers so that I can help you more better.
Thank you so much for your quick reply I appreciate it. Answering to your questions, the problem is not with other attachments, the problem occurs only with the Microsoft Excel attachments file where as I am able to outlook other files properly and even no problems with other Microsoft files. I have noticed that whenever I click on the attachment it gets launched to a new window of excel.exe. However, it works proper with other attachments.
I think that there is something wrong with Excel file that is been blocked when it is being run from any temp location. Have you tried opening those attachments from any other computer? As it may be that that any file on your computer must have got file be corrupted so kindly do a virus scan and reinstall Microsoft Excel application.
I even I am having the similar problem, as whenever I receive any of Excel attachments file and I try to open the attachment file from Outlook itself the main Excel application also gets open automatically to view the file without giving any command to open it, and when I close the original file the main Excel application doesn’t get closed! Does anyone have any idea to how to stop this
I would like to ask some questions to you so that I can help you in a better way. Can you please tell me that the problem which you are facing is it with all attachments? Or its just with the Excel attachment file? And what all options are you able to see on the screen when you right-click on the attachment to view it? Please get back to me with the answers so that I can help you more better.
Thank you so much for your quick reply I appreciate it. Answering to your questions, the problem is not with other attachments, the problem occurs only with the Microsoft Excel attachments file where as I am able to outlook other files properly and even no problems with other Microsoft files. I have noticed that whenever I click on the attachment it gets launched to a new window of excel.exe. However, it works proper with other attachments.
I think that there is something wrong with Excel file that is been blocked when it is being run from any temp location. Have you tried opening those attachments from any other computer? As it may be that that any file on your computer must have got file be corrupted so kindly do a virus scan and reinstall Microsoft Excel application.
How to block website using Website blocker?
Can anyone recommend a website blocker for Windows XP that makes all of the following:
- Block sites at certain times of day with flexible options.
- Must be able to have different settings for different users (shared PC)
- It cannot be easily disabled.
- No bloatware.
I know I can set my own proxy, but I have time for this ATM.
OpenDNS is a levelheaded job to be check for certain sites, like pron, gambling, drugs, games, etc, other than will know how to be domain-specific white As Xbox Live, etc it is not incredible at the same time as specific as OP requested. The best solution would upgrade to Windows 7 and the establishment of user account control. Still no video reach places with a simple "yes, I'm 18 years" button as Daily Motion, etc. Apparently.
I presume this is for children. In my Linux box to identify different access intended for each family member and subsequently make use of the Procom Latte stupid person's name) in the Firefox plug-in accounts of children. Not just the thing, but it is straightforward to make bring into play of and workings well for my 6 and 8 years old. It works in the midst of white lists, black or immediately the content filtering.
I wish to do something to boundary the make use of of Facebook and other sites "recreational" at the same time as boys are hypothetical to be responsibility homework or reconsideration of the exams. I'm not looking in favor of total blocks in convinced places all time. That's straightforward to do. I would like to be in charge of access for certain periods of moment in time only think application is called website blocker.
I wish to do the same thing for my kids I l don’t want to block all websites .i like to block certain website .after doing lot of research on the same topic I found out couple of programs than can help us to block certain website .This programs are designed in such manner that they will only block those website and will allow you to surf other website properly .They have multiple setting feature. They have custom filtering mode. Automatic filtering mode and keyword based filtering mode.There are lot of company which produce website blocking tool ie Symantec , McAfee, quick heal etc
- Block sites at certain times of day with flexible options.
- Must be able to have different settings for different users (shared PC)
- It cannot be easily disabled.
- No bloatware.
I know I can set my own proxy, but I have time for this ATM.
OpenDNS is a levelheaded job to be check for certain sites, like pron, gambling, drugs, games, etc, other than will know how to be domain-specific white As Xbox Live, etc it is not incredible at the same time as specific as OP requested. The best solution would upgrade to Windows 7 and the establishment of user account control. Still no video reach places with a simple "yes, I'm 18 years" button as Daily Motion, etc. Apparently.
I presume this is for children. In my Linux box to identify different access intended for each family member and subsequently make use of the Procom Latte stupid person's name) in the Firefox plug-in accounts of children. Not just the thing, but it is straightforward to make bring into play of and workings well for my 6 and 8 years old. It works in the midst of white lists, black or immediately the content filtering.
I wish to do something to boundary the make use of of Facebook and other sites "recreational" at the same time as boys are hypothetical to be responsibility homework or reconsideration of the exams. I'm not looking in favor of total blocks in convinced places all time. That's straightforward to do. I would like to be in charge of access for certain periods of moment in time only think application is called website blocker.
I wish to do the same thing for my kids I l don’t want to block all websites .i like to block certain website .after doing lot of research on the same topic I found out couple of programs than can help us to block certain website .This programs are designed in such manner that they will only block those website and will allow you to surf other website properly .They have multiple setting feature. They have custom filtering mode. Automatic filtering mode and keyword based filtering mode.There are lot of company which produce website blocking tool ie Symantec , McAfee, quick heal etc
Problems After The Installation of Seven Remix 1.0
Hello , I downloaded and installed software (seven remix xp1.0; aeroshake; AeroSnap; Shortcuts Windows 7) to provide a Windows XP tha look Windows 7 (not bad for that matter). But since I can not open certain files with VLC. whenever I Try to do so I get This message appears:
For more useful tips & hints, please browse for more information at our website:-
Mobile broadband Bsnl 3g
Airtel Broadband L user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
I uninstalled all the software in question but the appearance windows 7 is still in force while the software is no longer there (I even made a cleaning with CCleaner). I uninstalled and then reinstalled vlc but it is always the same! What does it mean? What is the appropriate remedy? (I just realize that I can not open files created with OpenOffice, the same error message!) Please Help Thanks in advance for your replies
Hello , You can try the "System Restore" by selecting a date prior to installing this software.System Restore works a lot like the Undo command in Microsoft Word. You can use System Restore to remove any system changes that were made since the last time you remember your computer working correctly. System Restore does not affect your personal data files (such as Microsoft Word documents, browsing history, drawings, favorites, or “mail) so you won't lose changes made to these files.
Hello , You can Solve This Problem By Doing This
Solution 1:
Uninstall: shell32.dll section from STARTMENU\Seven Remix XP\Uninstall.lnk
Solution 2 (Recomended):
Unisntall KB925902 Windows Update
Solution 3 (Recomended):
Install KB935448 Windows Update
For more useful tips & hints, please browse for more information at our website:-
Mobile broadband Bsnl 3g
Airtel Broadband L user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
I uninstalled all the software in question but the appearance windows 7 is still in force while the software is no longer there (I even made a cleaning with CCleaner). I uninstalled and then reinstalled vlc but it is always the same! What does it mean? What is the appropriate remedy? (I just realize that I can not open files created with OpenOffice, the same error message!) Please Help Thanks in advance for your replies
Hello , You can try the "System Restore" by selecting a date prior to installing this software.System Restore works a lot like the Undo command in Microsoft Word. You can use System Restore to remove any system changes that were made since the last time you remember your computer working correctly. System Restore does not affect your personal data files (such as Microsoft Word documents, browsing history, drawings, favorites, or “mail) so you won't lose changes made to these files.
Hello , You can Solve This Problem By Doing This
Solution 1:
Uninstall: shell32.dll section from STARTMENU\Seven Remix XP\Uninstall.lnk
Solution 2 (Recomended):
Unisntall KB925902 Windows Update
Solution 3 (Recomended):
Install KB935448 Windows Update
Nero 10: Unable To Open Recording Device
I have updated to the Nero 10 and I am receiving some problems now. So can someone help me out. I am having Windows 7. I am receiving the message that it is unable to open the recording device. But when I record it I get the message that There is no sample format selected. Please select a format and click OK. When I select the red button. So someone please help me out. Thanks to all in advance.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
Yes you said it right I am also getting the same message as you are getting. I have also recently upgraded to the Nero 10 and the problem started. I have searched it on the internet but have not found out the suitable solution for it. I have never received such problems with the Nero 7, 8, 9. But I am getting it in 10. So Is there anyone who can help us out. Thanks, to all who are going to reply.
I also had the same issue. But to solve out you have to make sure that the stereo mix is being enabled into your sound card. If this is not done then also you will face these kinds of problem. So to get the things right you should go to the Control panel/sound then go to the recording tab and right click and in device area you should select show disabled devices and there you should set stereo mix as the
I also had the same problem. I think during the release the Nero should have also given the list of setting to be done. Any how I have solved out my problem and thanks to this forum and all those who gave the solution. The problem was that I had recently switched xfi sound card to m/b sound chip. So I think the setting have been changed but the above reply helped me out to solve the problem. Thank you.
I think that there will be hardly any different answer to this thread because to solution provided above is absolutely correct and I don’t think that there will be any other solution to it. I think we should be allowed to choose Stereomix or Wavemix. This option is not displayed in the windows 7 normally because it is normally disabled and we need to enable it manually. Sorry I don’t know how to do that.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
Yes you said it right I am also getting the same message as you are getting. I have also recently upgraded to the Nero 10 and the problem started. I have searched it on the internet but have not found out the suitable solution for it. I have never received such problems with the Nero 7, 8, 9. But I am getting it in 10. So Is there anyone who can help us out. Thanks, to all who are going to reply.
I also had the same issue. But to solve out you have to make sure that the stereo mix is being enabled into your sound card. If this is not done then also you will face these kinds of problem. So to get the things right you should go to the Control panel/sound then go to the recording tab and right click and in device area you should select show disabled devices and there you should set stereo mix as the
I also had the same problem. I think during the release the Nero should have also given the list of setting to be done. Any how I have solved out my problem and thanks to this forum and all those who gave the solution. The problem was that I had recently switched xfi sound card to m/b sound chip. So I think the setting have been changed but the above reply helped me out to solve the problem. Thank you.
I think that there will be hardly any different answer to this thread because to solution provided above is absolutely correct and I don’t think that there will be any other solution to it. I think we should be allowed to choose Stereomix or Wavemix. This option is not displayed in the windows 7 normally because it is normally disabled and we need to enable it manually. Sorry I don’t know how to do that.
Outlook 2010 Error Code: 0x80041059
I am using windows 7 in the system and using it for the internet. Recently I have installed office 2010 beta in the operating system which I am using as windows 7. But at the time of installation I have appeared a problem while trying to set up an email account in the outlook 2010. It gets an error while searching the email account server setting. I am getting the following error message 0x80041059 and after this it fails. Any suggestion for this problem thanks.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
I think this is occurring due to the improper installation of the office version which you are using in the system. It can be sort by sort out by removing the office and reinstalling it again to the system. Also check it may be occurring in many cases due to using of 32bit outlook on 64 bit operating system. Check this it may be help you to sort out the problem. Try to update the version which you are using on the operating system. I think this may help you to get the desired solution.
This is a problem related to the software which you have installed in the system. I think it can be sort out by using some updated software's which you are using in the system. This may be due to some other applications you may be using rather than outlook 2010 i.e. outlook connector. If you are using outlook connector I would like to suggest you to uninstall this and then use the 64 bit outlook connector for the system. I think this may help you to sort out the error.
This type of problems or error's mainly occurs due to unregistered files. This may be happen due to some registry corruption issue. These problem can be isolated by following some steps which are described below:
Go to start.
Now click on the run option.
In the tab type 'regsvr32 inetcomm.dll' and the restart the system.
After this start the outlook and see if the problem is sorted or not.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
I think this is occurring due to the improper installation of the office version which you are using in the system. It can be sort by sort out by removing the office and reinstalling it again to the system. Also check it may be occurring in many cases due to using of 32bit outlook on 64 bit operating system. Check this it may be help you to sort out the problem. Try to update the version which you are using on the operating system. I think this may help you to get the desired solution.
This is a problem related to the software which you have installed in the system. I think it can be sort out by using some updated software's which you are using in the system. This may be due to some other applications you may be using rather than outlook 2010 i.e. outlook connector. If you are using outlook connector I would like to suggest you to uninstall this and then use the 64 bit outlook connector for the system. I think this may help you to sort out the error.
This type of problems or error's mainly occurs due to unregistered files. This may be happen due to some registry corruption issue. These problem can be isolated by following some steps which are described below:
Go to start.
Now click on the run option.
In the tab type 'regsvr32 inetcomm.dll' and the restart the system.
After this start the outlook and see if the problem is sorted or not.
nero multimedia suite 10: an error occurred while
I have recently got the nero 10 and when I am try to record I encounter it with the error saying that '' an error occurred while attempting to open the system output wave''. So I was panicked and thought that my sound card is in fault. So on checking it out I came to know that the sound card was fine but the error was still unknown. I don’t know what to do? I also searched it on the internet also but cannot find anything help full.
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
'' an error occurred while attempting to open the system output wave''. This sentence is bringing me the nightmares. I am too much frustrated and need the solution for it urgently. I am not able to record anything. I cannot do my job. Is the nero 10 having some problem in to it? Someone please help me out and give me the solution for it urgently please. Thank you and regards to all for replying me. Internet is not helping me.
I think you have got the problem in the wave editor. Are you using the wave editor? I also had the same problem as finally I was having problem in my wave editor. So I think your problem is also the same. When I got the problem I could not solve it but one day when one of my friend came when I was not at home. He did something and It was working and he told that wave editor was creating the problem.
Yes the Nero 10 are having lots and lots of bugs into it. And the Nero concern people are working on it. It sounds that your wave editor. So can you tell me which version of the wave editor are you using? You can find the version into about-box of Nero Wave editor. And if you are not having the 5.10.10. version of the wave editor then better you update it and your problem would be solved. Try it trust me.
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
'' an error occurred while attempting to open the system output wave''. This sentence is bringing me the nightmares. I am too much frustrated and need the solution for it urgently. I am not able to record anything. I cannot do my job. Is the nero 10 having some problem in to it? Someone please help me out and give me the solution for it urgently please. Thank you and regards to all for replying me. Internet is not helping me.
I think you have got the problem in the wave editor. Are you using the wave editor? I also had the same problem as finally I was having problem in my wave editor. So I think your problem is also the same. When I got the problem I could not solve it but one day when one of my friend came when I was not at home. He did something and It was working and he told that wave editor was creating the problem.
Yes the Nero 10 are having lots and lots of bugs into it. And the Nero concern people are working on it. It sounds that your wave editor. So can you tell me which version of the wave editor are you using? You can find the version into about-box of Nero Wave editor. And if you are not having the 5.10.10. version of the wave editor then better you update it and your problem would be solved. Try it trust me.
Unable to update Nero 10
I'm running with Vista32 SP1.I did a full installation of Nero MS 10 without any problem. I for updates, and said he had to update Nero update. To download and install the update, and then said "service unavailable update."
The update log ends with:
MSI (s) (6C: 30) [08:17:5 9:644]: Product: Nero Update - Configuration completed successfully.
MSI (s) (6C: 30) [08:17:5 9:644]: Windows Installer reconfigured the product. Product Name: Nero update. Product Version: 1.0.10900.31.0. Product Language: 1033. Reconfiguration success or error status: 0.
MSI (s) (6C: 30) [08:17:5 9:644]: Windows Installer requires a system reboot. Product Name: Nero update. Product Version: 1.0.10900.31.0. Product Language: 1033. Type reboot 2. Reason for Restart: 1.
MSI (s) (6C: 30) [8:17:5 9: 644]: Product: Nero update. Restart required. Installation or upgrade to the product requires a restart of all changes to take effect. The restart was postponed to a later date
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
By the side of this time, the update service is out of stock. The site could be receiving maintenance. The preeminent I can say is keep trying until and unless you succeed. I’m not getting error message as soon as demanding to make sure for updates. It appears instantaneously; consequently I imagine it is not smooth, demanding to establish a connection in the direction of the server for updates. I need to wait for some time than again I will try updating.
I consider you're accurate. I search out the equivalent memorandum, if I chose in the direction of upgrading services or online. I speculate what's disappearing on in the midst of with the intention of I do not make use of the automatic make sure for updates and naupdate.exe is disabled in the Task Manager. Strength of character not let me activate it. I immediately checked on my machine is running Windows 7.
No problem, it is at a standstill phenomenon. The putting in place for the installation, the file you had is an old (Nero-10.0.13100.exe).I downloaded the latest trial version (Nero-10.6.11300_trial.exe).I was accepted wisdom of from top to bottom uninstall again and re-install the trial version subsequent to entering my S / N, and observe if that fixes things. Other than based on previous responses to fade I wonder now if it will work.
I uninstalled, restarted, did the disk cleanup, and after that install the trial version and the whole thing seems well now. An update to Nero Kwik establish for the media, downloaded and installed. No new updates obtainable. One proposal: when downloading the updates that would be a high-quality thing to demonstrate the download progress. I had to unlock the Resource Manager and mark the disk check to determine if the discharge was actually proceeding I'm excited to see what Version 10 can do.
Technology is enormous as soon as it works. Most recent Saturday, I reinstalled the installer platinum 10.6.118. It sets the program to update Nero. Furthermore, it allowed me to set up BackItUp I have had a solid time with that difficulty and is in the hands of developers. I will know tomorrow if BackItUp is operational appropriately. No platinum was uninstalled before running the installer. Glad to be operational
The update log ends with:
MSI (s) (6C: 30) [08:17:5 9:644]: Product: Nero Update - Configuration completed successfully.
MSI (s) (6C: 30) [08:17:5 9:644]: Windows Installer reconfigured the product. Product Name: Nero update. Product Version: 1.0.10900.31.0. Product Language: 1033. Reconfiguration success or error status: 0.
MSI (s) (6C: 30) [08:17:5 9:644]: Windows Installer requires a system reboot. Product Name: Nero update. Product Version: 1.0.10900.31.0. Product Language: 1033. Type reboot 2. Reason for Restart: 1.
MSI (s) (6C: 30) [8:17:5 9: 644]: Product: Nero update. Restart required. Installation or upgrade to the product requires a restart of all changes to take effect. The restart was postponed to a later date
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
By the side of this time, the update service is out of stock. The site could be receiving maintenance. The preeminent I can say is keep trying until and unless you succeed. I’m not getting error message as soon as demanding to make sure for updates. It appears instantaneously; consequently I imagine it is not smooth, demanding to establish a connection in the direction of the server for updates. I need to wait for some time than again I will try updating.
I consider you're accurate. I search out the equivalent memorandum, if I chose in the direction of upgrading services or online. I speculate what's disappearing on in the midst of with the intention of I do not make use of the automatic make sure for updates and naupdate.exe is disabled in the Task Manager. Strength of character not let me activate it. I immediately checked on my machine is running Windows 7.
No problem, it is at a standstill phenomenon. The putting in place for the installation, the file you had is an old (Nero-10.0.13100.exe).I downloaded the latest trial version (Nero-10.6.11300_trial.exe).I was accepted wisdom of from top to bottom uninstall again and re-install the trial version subsequent to entering my S / N, and observe if that fixes things. Other than based on previous responses to fade I wonder now if it will work.
I uninstalled, restarted, did the disk cleanup, and after that install the trial version and the whole thing seems well now. An update to Nero Kwik establish for the media, downloaded and installed. No new updates obtainable. One proposal: when downloading the updates that would be a high-quality thing to demonstrate the download progress. I had to unlock the Resource Manager and mark the disk check to determine if the discharge was actually proceeding I'm excited to see what Version 10 can do.
Technology is enormous as soon as it works. Most recent Saturday, I reinstalled the installer platinum 10.6.118. It sets the program to update Nero. Furthermore, it allowed me to set up BackItUp I have had a solid time with that difficulty and is in the hands of developers. I will know tomorrow if BackItUp is operational appropriately. No platinum was uninstalled before running the installer. Glad to be operational
wave editor issue in Nero 10
I am having one small problem. So decided to post it over here and get it solved. Hope so I find some nice solution over here. I have just connected my amp to the computer. Nero is working fine and so is the sound. I tried out the different solutions and did many things with it but none of it helps me out to get the things sorted out. The problem is when I play the music Nero is not playing it off. I am using windows 7.
For more useful tips & hints, please browse for more information at our website:-
how to unlock
How to Configure
I don’t know what exactly is causing the problem. But I am also in the same boat as you are traveling. I also tried out to connect the amp and play the songs into it but it is not working. Mine also sound is working all fine. I have searched it on the internet regarding the same. But I am not getting some sensible answers for it. Has someone else got the same problem and solved it out, then please share.
This is the common problem all are facing with the windows 7. You need to set the sound card in the Device settings. By clicking the option you will get into Device settings. In this window you should set the prefix as the Input device. The Master volume entry in the console of the recording represent that the chosen in the setting window. Hope this all things will help you in getting the things sorted out and help you.
I appreciate your solution. You had made a good attempt to solve the problem but unfortunately this has not helped me out. Hope so you can give some other solution that can help me out. Please someone else also help me and try to solve my problem out. I need to get the problem solved as early as possible. Thank you to all once again. And thank you my friend to make an attempt to solve out the problem.
For more useful tips & hints, please browse for more information at our website:-
how to unlock
How to Configure
I don’t know what exactly is causing the problem. But I am also in the same boat as you are traveling. I also tried out to connect the amp and play the songs into it but it is not working. Mine also sound is working all fine. I have searched it on the internet regarding the same. But I am not getting some sensible answers for it. Has someone else got the same problem and solved it out, then please share.
This is the common problem all are facing with the windows 7. You need to set the sound card in the Device settings. By clicking the option you will get into Device settings. In this window you should set the prefix as the Input device. The Master volume entry in the console of the recording represent that the chosen in the setting window. Hope this all things will help you in getting the things sorted out and help you.
I appreciate your solution. You had made a good attempt to solve the problem but unfortunately this has not helped me out. Hope so you can give some other solution that can help me out. Please someone else also help me and try to solve my problem out. I need to get the problem solved as early as possible. Thank you to all once again. And thank you my friend to make an attempt to solve out the problem.
Looking for Cover Design help in Nero 10
I have just got the Nero 10 and gave up the Nero 5. The purpose I am using Nero is just for burning the discs and nothing else. But I found that the Nero 10 has lots and lots of features confusing me many a times. Now the problem is that I am not able to find the cover design in which I can list the tracks. I am new users so I am not able to find it. Can anyone help me in finding it and get the problem solved. Thanks
I think you are using the trial version of the Nero 10. And you are getting the issue may be because of the GraceNote. So try to get the update and you should search it on the internet regarding the same. Internet is the one place where you will find each and every thing. But it is nice that you have posted the question over here because many of the others would also have the same problem and this thread will help them out.
Thank you for such a quick reply. I would bring to your notice that I am the regular user of this forum. As I just love it because it helps me in solving out my doubts and I also post in the replies sometime. So thank you. But as you said it about the GraceNote. I have no idea about it so can you tell me more about it and how it is related to my problem. Thanks again for the reply and am looking for some more.
I would be glad to give you the answer about the gracenote. First of all I will tell you that you can also visit to their website and have a look about them. But mean time gracenote is the database of the audio cd’s. Nero makes use of it to get the information automatically and if gracenote is not there then you have to manually get the information. And you also go to the cover page through the gracenote only.
For more useful tips & hints, please browse for more information at our website:-
Connect Broadband
mtnl broadband plan
No I do not think that the problem would be in the gracenote. Because it has got nothing to do with the cover page. The thing is you can right click on the ‘added audio file’ then go and select the properties. There you will find the information which are to be added up in the cover page. The fields would be filled by taking the information from the source file and the one which is left blank does not appear on the cover page.
I am glad that more and more people are trying to help me out, but I have to disappoint you again. The solution you provided was really impressive but unfortunately it has not helped me out. I would like to say you that the main problem is in the settings itself. I would say you that the artist field is checked in the setting but it is not being displayed in the cover page. So no idea what is going on in the settings.
I think you are using the trial version of the Nero 10. And you are getting the issue may be because of the GraceNote. So try to get the update and you should search it on the internet regarding the same. Internet is the one place where you will find each and every thing. But it is nice that you have posted the question over here because many of the others would also have the same problem and this thread will help them out.
Thank you for such a quick reply. I would bring to your notice that I am the regular user of this forum. As I just love it because it helps me in solving out my doubts and I also post in the replies sometime. So thank you. But as you said it about the GraceNote. I have no idea about it so can you tell me more about it and how it is related to my problem. Thanks again for the reply and am looking for some more.
I would be glad to give you the answer about the gracenote. First of all I will tell you that you can also visit to their website and have a look about them. But mean time gracenote is the database of the audio cd’s. Nero makes use of it to get the information automatically and if gracenote is not there then you have to manually get the information. And you also go to the cover page through the gracenote only.
For more useful tips & hints, please browse for more information at our website:-
Connect Broadband
mtnl broadband plan
No I do not think that the problem would be in the gracenote. Because it has got nothing to do with the cover page. The thing is you can right click on the ‘added audio file’ then go and select the properties. There you will find the information which are to be added up in the cover page. The fields would be filled by taking the information from the source file and the one which is left blank does not appear on the cover page.
I am glad that more and more people are trying to help me out, but I have to disappoint you again. The solution you provided was really impressive but unfortunately it has not helped me out. I would like to say you that the main problem is in the settings itself. I would say you that the artist field is checked in the setting but it is not being displayed in the cover page. So no idea what is going on in the settings.
Outlook 2010 giving error code 0x80040154
I have worked so far my e-mails using Windows Mail (on Vista). Now I have risen Office 2010 and want to manage my e-mails in the new Outlook 2010. Unfortunately, I can send in Outlook 2010 only, all incoming e-mails continue to be displayed only on Windows Mail, but not in Outlook 2010. I use a free hotmail account. As an error after the action "receive and send all folders /" I get error code 0x80040154. Solutions to be offered, but only for Outlook 2002 or older. My old office was completely uninstalled after I installed the new Office 2010. To solve the problem I have the account type from POP3 and IMAP switched to the old deleted e-mail profile under Control Panel / E-mail / profiles and created a new profile. After examination of the account settings I get an error-free and green tick test message - but only on my Windows Mail application. Also various forum posts to repairs of the files have shown only minor defects and are then (automatically) has been repaired. I really do not know more ...! Can someone help me?
For more useful tips & hints, please browse for more information at our website:-
Connect Broadband
mtnl broadband plan
If the behavior with the Ctrl key also occurs, it should not be add-ins. You might want a repair installation of Office 2010 should try that does not help, remove Office 2010 from Fixit contact the following Microsoft article and install it again then. The Windows Installer Cleanup program fixes although some installation problems, but sometimes damage other components that are installed on the computer. Therefore, the tool is no longer in the Microsoft Download Center. The fix-it solutions in this article allow Office 2003 - Office 2007 - remove and Office 2010 suites complete, without damaging other Windows components.
Sometimes can be present on the computer 2003, 2007 or 2010 Microsoft Office suites do not feature the software in the Control Panel in Windows XP or Programs and Features, the feature in the Control Panel in Windows Vista to uninstall if any of the following conditions:
The installation process for installing a new program was not completed. There is therefore a partially installed program. If you try to install the program again, the attempt fails.
A previously installed program can not be removed because the installation files are corrupted.
In an earlier experiment, you had problems installing Office 2010.
For more useful tips & hints, please browse for more information at our website:-
Connect Broadband
mtnl broadband plan
If the behavior with the Ctrl key also occurs, it should not be add-ins. You might want a repair installation of Office 2010 should try that does not help, remove Office 2010 from Fixit contact the following Microsoft article and install it again then. The Windows Installer Cleanup program fixes although some installation problems, but sometimes damage other components that are installed on the computer. Therefore, the tool is no longer in the Microsoft Download Center. The fix-it solutions in this article allow Office 2003 - Office 2007 - remove and Office 2010 suites complete, without damaging other Windows components.
Sometimes can be present on the computer 2003, 2007 or 2010 Microsoft Office suites do not feature the software in the Control Panel in Windows XP or Programs and Features, the feature in the Control Panel in Windows Vista to uninstall if any of the following conditions:
The installation process for installing a new program was not completed. There is therefore a partially installed program. If you try to install the program again, the attempt fails.
A previously installed program can not be removed because the installation files are corrupted.
In an earlier experiment, you had problems installing Office 2010.
Is it possible to cancel an outlook setup?
I have recently purchased a laptop of dell and I am having the operating system of windows 7 pre installed in it. I have my own company and now I am trying to set the company email by using the outlook 2007 but when I am trying to do this but there is an error that it is not able to connect the exchange server so now I am thinking that there is the problem in the outlook but when I am trying to cancel it, it says that it is not available in the offline and cancels the program. Thanking all in advanced for helping me and giving me the permission.
For more useful tips & hints, please browse for more information at our website:-
Motorola Flipout
Steam Client
I think that if you are having the issues while sending the email I think that you have to follow the steps:
You have to first click on the tools menu and then you have to just select the E-mail accounts.
And then you have to highlight the email account that is mentioned there and then you have to click on the change option.
And then you have to click on the advanced tab which is located at the last tab and then you have to change the SMTP port to the alternative and then change the port of 587 and then you have to click on the OK.
I hope that this will help you.
I think that if you want to configure the outlook 2007 you should follow the following steps.
You have to first open the outlook 2007.
And then you have to click on the tools menu and then select the account settings in the tools. I think the account setting is the 12th option in the tools menu.
And after clicking in the account settings you have to just click on the Email tab and then click on the new ….button.
And then you have to select the Microsoft exchange POP3, IMAP or the HTTP and then click on the next button.
And after clicking on the next button then you have to ON the auto account setup window and then you have to check manually and then configure server settings and then additional server types and then click on the next button.
For more useful tips & hints, please browse for more information at our website:-
Motorola Flipout
Steam Client
I think that if you are having the issues while sending the email I think that you have to follow the steps:
You have to first click on the tools menu and then you have to just select the E-mail accounts.
And then you have to highlight the email account that is mentioned there and then you have to click on the change option.
And then you have to click on the advanced tab which is located at the last tab and then you have to change the SMTP port to the alternative and then change the port of 587 and then you have to click on the OK.
I hope that this will help you.
I think that if you want to configure the outlook 2007 you should follow the following steps.
You have to first open the outlook 2007.
And then you have to click on the tools menu and then select the account settings in the tools. I think the account setting is the 12th option in the tools menu.
And after clicking in the account settings you have to just click on the Email tab and then click on the new ….button.
And then you have to select the Microsoft exchange POP3, IMAP or the HTTP and then click on the next button.
And after clicking on the next button then you have to ON the auto account setup window and then you have to check manually and then configure server settings and then additional server types and then click on the next button.
Just 8 of my 16 cores visible in Task manager
My friend and I have recently built a new system with 4 CPU Quad core. And now it is forming a 16 Quad core. And I am having the operating system of windows 7 and in the in the operating system manager I have seen that the windows 7 detecting all my 16 processor but when I am opening the task manager then I am having only 8 Quad cores present in that. I thought that I should install a PRO Toll and I installed it and I think that this program for the audio and this program is like I can assign as many as core I want to assign to this application. And I was able to choose only 1 to 8. So the computer is working only half. To fix this problem I checked in the bios but I was unable to solve the problem. So please help me.
For more useful tips & hints, please browse for more information at our website:-
quick pre-patch
firmware update
I want to know that which version you are using of windows 7. I suggest you that the cap is how many processors may detect if you are not having the ultimate version. But I think that the even when it is unlimited it is limited to 2 and when you are on the 4 and they want to fork out the cash for the edition of the enterprise.
Sorry for giving you the half information but I am having the operating system of windows 7 and I am having it on the x64 bits and I think that it is up to date. And the configuration of my computer is having Tyan Thunder n4250QE (S4985), and the 4 X Opteron 8147, and it is also having HE 24 GB of ram DDR2, with Windows 7 Ultimate x64. And I think that the operating system can support up to 256 cores, versus 64 in the vista. Thank you for asking me the questions.
You should try to run the server 2008 edition and it is very close to windows XP and I think that the XP pro 64 bit works and it doesn’t matters that what versions of the windows 7 does it support 2 sockets. You can use this as a workstation by manually installing the Microsoft windows server 2008. You can also use the work station of windows server made by the SAWO if you want to make the whole process automatic. You can find on the internet to make the workstation. But if you are having it supports the positive about it.
For more useful tips & hints, please browse for more information at our website:-
quick pre-patch
firmware update
I want to know that which version you are using of windows 7. I suggest you that the cap is how many processors may detect if you are not having the ultimate version. But I think that the even when it is unlimited it is limited to 2 and when you are on the 4 and they want to fork out the cash for the edition of the enterprise.
Sorry for giving you the half information but I am having the operating system of windows 7 and I am having it on the x64 bits and I think that it is up to date. And the configuration of my computer is having Tyan Thunder n4250QE (S4985), and the 4 X Opteron 8147, and it is also having HE 24 GB of ram DDR2, with Windows 7 Ultimate x64. And I think that the operating system can support up to 256 cores, versus 64 in the vista. Thank you for asking me the questions.
You should try to run the server 2008 edition and it is very close to windows XP and I think that the XP pro 64 bit works and it doesn’t matters that what versions of the windows 7 does it support 2 sockets. You can use this as a workstation by manually installing the Microsoft windows server 2008. You can also use the work station of windows server made by the SAWO if you want to make the whole process automatic. You can find on the internet to make the workstation. But if you are having it supports the positive about it.
Unable to load the Nouveau Driver on the Xserver
Recently I have installed Arch Linux on the computer of mine. I am not having lots of information regarding Linux based operating system hence I have come to this forum to get help from the users of this forum. Recently I have installed xf86-video-nouveau on the computer. Well I am getting couple of error message while creating the configuration files as well as entering startx on the computer of mine. Let me know why I am getting the above mentioned issue. Any help on this particular matter would be highly appreciated. Thanks a lot in advance.
For more useful tips & hints, please browse for more information at our website:-
MacDrive Windows
First Online Car
In order to figure out the root cause of the problem I wanted to ask some particular information so that I can figure out the root cause of the problem. Let me know about the hardware configuration of the computer of yours. Do you have installed all the necessary drivers on the computer of yours? you have mentioned that you are getting an error message on the computer so you should post the error message which you are getting so that I can figure out the exact root cause of the problem.
I think you have to perform Kernel Mode Setting for the drivers which you have installed on the computer of yours. The KMS would be enabled at the time of the Loading Modules. It might create an undesirable screen flickers on the system of yours. you should simply remove the Vga= option from the kernel command line into the /boot/grub/menu.lst. any other framebuffer drivers would cause the conflict on the KMS. So you have to configure the KMS appropriately so that you can resolve the issue.
I am suspecting that the nouveau drivers might be lacking the hardware acceleration. If you are not supposed to run anything like composite window manger like compiz. If you are not wanted the same then I think you need not to have a 3D acceleration and the drivers which you have installed on the computer would be working fine. I am hoping that the thing which I have mentioned over here would be
For more useful tips & hints, please browse for more information at our website:-
MacDrive Windows
First Online Car
In order to figure out the root cause of the problem I wanted to ask some particular information so that I can figure out the root cause of the problem. Let me know about the hardware configuration of the computer of yours. Do you have installed all the necessary drivers on the computer of yours? you have mentioned that you are getting an error message on the computer so you should post the error message which you are getting so that I can figure out the exact root cause of the problem.
I think you have to perform Kernel Mode Setting for the drivers which you have installed on the computer of yours. The KMS would be enabled at the time of the Loading Modules. It might create an undesirable screen flickers on the system of yours. you should simply remove the Vga= option from the kernel command line into the /boot/grub/menu.lst. any other framebuffer drivers would cause the conflict on the KMS. So you have to configure the KMS appropriately so that you can resolve the issue.
I am suspecting that the nouveau drivers might be lacking the hardware acceleration. If you are not supposed to run anything like composite window manger like compiz. If you are not wanted the same then I think you need not to have a 3D acceleration and the drivers which you have installed on the computer would be working fine. I am hoping that the thing which I have mentioned over here would be
Unable to install Unrar on Debian 6
Previously I was using windows based system however recently I have switched to the Linux based operating system. I have tried to install the unrar on the computer of mine but it did not seems to be installing on the system at all. Let me know why I am unable to installed the unrar on the computer. If you are having any of the useful instruction post over here. Thanks a lot in advance.
I think there could be several reason which might be the root cause of the problem.
Can you tell me which operating system do you have installed on the computer?
Which Version of kernel you are using?
Tell me about the hard ware configuration of the computer?
Do you have done any recent changes on the computer?
Well I am having a particular solution which you can try to fix the matter of yours. I recommend following command which you should run on the system of yours. Make sure that you have copy and pasted the above mentioned command terminal.
Code:
apt-get install unrar-free
I am hoping that the command which I have mentioned over here would be useful to you.
Let me know whether the above mentioned command is working or not. If there is no difference in the situation then I recommend following command on the terminal.
Code:
apt-cache search unrar
you should copy and paste the above mentioned command on the terminal and press enter.So try the same and let me know whether it is working or not.
You can use the following command on the terminal to install unrar on the computer of yours.
Code:
sudo apt-get install unrar
I think there could be several reason which might be the root cause of the problem.
Can you tell me which operating system do you have installed on the computer?
Which Version of kernel you are using?
Tell me about the hard ware configuration of the computer?
Do you have done any recent changes on the computer?
Well I am having a particular solution which you can try to fix the matter of yours. I recommend following command which you should run on the system of yours. Make sure that you have copy and pasted the above mentioned command terminal.
Code:
apt-get install unrar-free
I am hoping that the command which I have mentioned over here would be useful to you.
Let me know whether the above mentioned command is working or not. If there is no difference in the situation then I recommend following command on the terminal.
Code:
apt-cache search unrar
you should copy and paste the above mentioned command on the terminal and press enter.So try the same and let me know whether it is working or not.
You can use the following command on the terminal to install unrar on the computer of yours.
Code:
sudo apt-get install unrar
Files turn into zero bytes after Syncing with backitup
Hello friends, I was trying to use the backitup sync option that was linking two folders and chosen folder named as mirror. That folder was having all the music files (.mp3 file). After that when I tried to play the music then it shows me the error. When I saw the properties of the files then I got that all the files were turned into zero byte file. Do you have any idea that what may be wrong with that? Please reply, I will appreciate each reply on this.
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
This seems to be very strange as the BackItUp will never do anything with the files. It will just copy the files. After reading your post, I think that you have synced to an Audio CD accidentally and so it is showing you the zero bytes. Anyway, it will help us to give you the solution if you can provide some more information about this like any log file or some screen shot of that. So post that in your next post.
I think that backitups that you have used to do the backup is corrupted and for that reason you are getting this issue. Anyway, once those files are converted to zero bytes then I don’t think that there is any way to get those files back. Just to avoid these things in future just uninstall that from your computer and then install that again. This is the best way by which you can ignore such things in future.
There might be some virus in your system which is causing this issue. Normally the backitups should not cause such problems. So scan your system with some good antivirus program and see if that can detect virus in your system. Make sure that you are making use of the updated antivirus otherwise it will skip some virus and problem may be continued in future as well. Thank you!!!
For more useful tips & hints, please browse for more information at our website:-
SuperPipe Graphics card
Patapon
This seems to be very strange as the BackItUp will never do anything with the files. It will just copy the files. After reading your post, I think that you have synced to an Audio CD accidentally and so it is showing you the zero bytes. Anyway, it will help us to give you the solution if you can provide some more information about this like any log file or some screen shot of that. So post that in your next post.
I think that backitups that you have used to do the backup is corrupted and for that reason you are getting this issue. Anyway, once those files are converted to zero bytes then I don’t think that there is any way to get those files back. Just to avoid these things in future just uninstall that from your computer and then install that again. This is the best way by which you can ignore such things in future.
There might be some virus in your system which is causing this issue. Normally the backitups should not cause such problems. So scan your system with some good antivirus program and see if that can detect virus in your system. Make sure that you are making use of the updated antivirus otherwise it will skip some virus and problem may be continued in future as well. Thank you!!!
How to get application process ID for ms-word
Hi, I used to do lot of work on the Microsoft word application where I come up with process id. I want to know my process id for my Microsoft word application. The MS-Word applications are identify upon by my some other application except my visual c application when I try to use it in the same machine. Does anyone what may be the reason of this problem and how to persist it as I had tried many things but not anything had help me out.
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
I don’t know much about it and had a made a bit search regarding your problem but dint come up with much things. You should try to use the toolhlp library in that use CreateToolhelp32Snapshot(...) and then try Process32First(...) and then Process32Next(...). You should even try few sample code which is given in the MSDN which id under the CreateToolHelp32Snapshot API help. Hope this will help you to get clear from tour problem.
Even I was having the same problem with the visual c and when I try to compile the source code I came up with a compile error. The source code through an error message is given below:-
Code:
#include
#include
#include
BOOL Getcourserecord ()
{
HANDLE hcourse= NULL;
BOOL ar = FALSE;
PROCESSENTRY32 p32 = {0};
hcourse = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, 0);
if (hcourse == INVALID_HANDLE_VALUE)
return (forged);
p32.dwSize = sizeof(PROCESSENTRY32);
if (Process32First(hcourse, & p32))
{
DWORD dwPriorityClass;
BOOL getm = FALSE;
MODULEENTRY32 me32 = {0};
do
{
getm = GetProcessModule(p32.th32ProcessID,
p32.th32ModuleID, &me32, sizeof(MODULEENTRY32));
if (getm)
{
HANDLE hProcess;
hProcess = OpenProcess (PROCESS_ALL_ACCESS,
FALSE, p32.th32ProcessID);
dwPriorityClass = GetPriorityClass (hProcess);
CloseHandle (hProcess);
printf( "\n precedence group \t%d\n",
p32.pcPriClassBase);
printf( "PID123\t\t\t%d\n", p32.th32ProcessID);
printf( "Thread calculate\t\t%d\n", p32.cntThreads);
printf( "Module given name\t\t%s\n", me32.szModule);
printf( "Full pathway\t\t%s\n\n", me32.szExePath);
}
}
while (Process32Next(hProcessSnap, & p32));
ar = right;
}
else
ar = forged; CloseHandle (hcourse);
return (ar);
}
int main (int argc, char** argv)
{
Getcourserecord ();
return 0;
}
is showing an error c2065 and says undeclared identifier
You must see the example code which is given is MSDN for the Module32First(...) which is having the an example of code GetProcessModule which in turn given in the function and you don’t required an GetProcessModule piece so just create the snap short for the process32first and the process32last as the LPPROCESSENTRY32 lppe is previously having the method name. That code will surely work for you and if you still face the same issue then search for it on net.
I had seen your code and even go through the instruction given to me but after that I started facing the different problem when I’m trying to open an WINWORD windowsi was not able to see anything on it beside only one process with an name wWINWORD which is from the console output and I was even able to see many process of IEXPLORE.EXE which came from the console output in different IE WINDOW does anyone know why this is happening.
For more useful tips & hints, please browse for more information at our website:-
Silverstone Fortress
Secret Files
I don’t know much about it and had a made a bit search regarding your problem but dint come up with much things. You should try to use the toolhlp library in that use CreateToolhelp32Snapshot(...) and then try Process32First(...) and then Process32Next(...). You should even try few sample code which is given in the MSDN which id under the CreateToolHelp32Snapshot API help. Hope this will help you to get clear from tour problem.
Even I was having the same problem with the visual c and when I try to compile the source code I came up with a compile error. The source code through an error message is given below:-
Code:
#include
#include
#include
BOOL Getcourserecord ()
{
HANDLE hcourse= NULL;
BOOL ar = FALSE;
PROCESSENTRY32 p32 = {0};
hcourse = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, 0);
if (hcourse == INVALID_HANDLE_VALUE)
return (forged);
p32.dwSize = sizeof(PROCESSENTRY32);
if (Process32First(hcourse, & p32))
{
DWORD dwPriorityClass;
BOOL getm = FALSE;
MODULEENTRY32 me32 = {0};
do
{
getm = GetProcessModule(p32.th32ProcessID,
p32.th32ModuleID, &me32, sizeof(MODULEENTRY32));
if (getm)
{
HANDLE hProcess;
hProcess = OpenProcess (PROCESS_ALL_ACCESS,
FALSE, p32.th32ProcessID);
dwPriorityClass = GetPriorityClass (hProcess);
CloseHandle (hProcess);
printf( "\n precedence group \t%d\n",
p32.pcPriClassBase);
printf( "PID123\t\t\t%d\n", p32.th32ProcessID);
printf( "Thread calculate\t\t%d\n", p32.cntThreads);
printf( "Module given name\t\t%s\n", me32.szModule);
printf( "Full pathway\t\t%s\n\n", me32.szExePath);
}
}
while (Process32Next(hProcessSnap, & p32));
ar = right;
}
else
ar = forged; CloseHandle (hcourse);
return (ar);
}
int main (int argc, char** argv)
{
Getcourserecord ();
return 0;
}
is showing an error c2065 and says undeclared identifier
You must see the example code which is given is MSDN for the Module32First(...) which is having the an example of code GetProcessModule which in turn given in the function and you don’t required an GetProcessModule piece so just create the snap short for the process32first and the process32last as the LPPROCESSENTRY32 lppe is previously having the method name. That code will surely work for you and if you still face the same issue then search for it on net.
I had seen your code and even go through the instruction given to me but after that I started facing the different problem when I’m trying to open an WINWORD windowsi was not able to see anything on it beside only one process with an name wWINWORD which is from the console output and I was even able to see many process of IEXPLORE.EXE which came from the console output in different IE WINDOW does anyone know why this is happening.
Windows defrag vs. Smart Defrag
Hi, I have been using the windows 7 from last few years and I am being always curious at knowing all the new things, so recently I came across the fragmentation word, actually I don’t know what is it actually. But after searching the internet I got some idea about that, but I would like if someone told me about this, and from the same source I got that there are different third part software as well for doing the same thing, and among them one is smart defrag, so my question is like what is the difference in both of them?
See, I don’t know what is the basic difference but one thing is sure that the software would be off course good if you compare it with the windows defragmentator, because first of all they all meant to be designed to work only with these functions, as they all have very good capability of fegragmenting the disk space. And off course the speed is too good in the smart defrag. I have once tried to defrag using the windows by default defrag, but it consumes too much time doing this.
The above mentioned software is one of the best software for defragmentation. See I would like to tell you some of the features of the smart defrag.
1- Tremendously speedy and well-organized Defragmentation
2- Intended for Top Disk routine
3- Provides Automatic Defragmentation
4- It has included Boot Time Defrag Technology
If you are planning to defrag your HDD then I would recommend you to use this software only as there are too many new feature included as mentioned by the above user, along with that it has a booster through which you can fasten the process of de-fragmentation. And the main feature that I like the most is like we don’t have to bother about it every time as we need to use the windows defrag manually while this work automatically, and off course it will consume less time than the windows
Smart Defrag propose a small number of extras feature, together with a scheduler, through which you can simply set it up to only defrag during downtime on your PC. Thus you can set is to whenever you want it to run, and my recommendation is to set it on start up or even have the application shut down your PC. But I think I have heard that the it is not essential for the windows 7 because the Operating System defrags continually on it's own.
See, I don’t know what is the basic difference but one thing is sure that the software would be off course good if you compare it with the windows defragmentator, because first of all they all meant to be designed to work only with these functions, as they all have very good capability of fegragmenting the disk space. And off course the speed is too good in the smart defrag. I have once tried to defrag using the windows by default defrag, but it consumes too much time doing this.
The above mentioned software is one of the best software for defragmentation. See I would like to tell you some of the features of the smart defrag.
1- Tremendously speedy and well-organized Defragmentation
2- Intended for Top Disk routine
3- Provides Automatic Defragmentation
4- It has included Boot Time Defrag Technology
If you are planning to defrag your HDD then I would recommend you to use this software only as there are too many new feature included as mentioned by the above user, along with that it has a booster through which you can fasten the process of de-fragmentation. And the main feature that I like the most is like we don’t have to bother about it every time as we need to use the windows defrag manually while this work automatically, and off course it will consume less time than the windows
Smart Defrag propose a small number of extras feature, together with a scheduler, through which you can simply set it up to only defrag during downtime on your PC. Thus you can set is to whenever you want it to run, and my recommendation is to set it on start up or even have the application shut down your PC. But I think I have heard that the it is not essential for the windows 7 because the Operating System defrags continually on it's own.
Subscribe to:
Posts (Atom)